![[Section Divider]](wave.gif){kind=small}
Tramfloc Is Pleased To Announce
We Have Updated Our Site For
Easier Access And A Fresh Face. |
MSDS |
Technical Information Bulletin |
TRAMFLOC 348
TRAMFLOC 348 is injected into your reuse lines and goes directly into your washbox for constant belt cleaning.
TRAMFLOC 348 eliminates belt blinding and returns your belts to new condition constantly throughout your sludge processing.
TRAMFLOC 348 eliminates powerwashing or additional cleaning cycles.
TRAMFLOC 348 can reduce polymer consumption.
TRAMFLOC 348 can increase your Gallons per Minute of sludge processing.
TRAMFLOC 348 can reduce sludge hauling costs.
TRAMFLOC 348 injection pumps are loaned FREE and warranted for as long as you use TRAMFLOC 348.
FEATURES:
No Caustics
No Ammonias
No Solvents
No Acids
Neutral pH
No Sodium Metasylicate
USES:
Improves Sludge Solids
Improves Belt-Filter Press Throughput
Cleans Polymer Tanks
Cleans Polymer Lines
Cleans Slippery Polymer Spills
Ends Belt Blinding from Polymer & Sludge Buildup
PASSES:
Priority Pollutant Scan EPA Method 624
Priority Pollutant Scan EPA Method 625
Acute Toxicity Analysis
Belt Fabric Test
Material Safety Data Sheet
TRAMFLOC 902
Belt
Anti-Blinding System & Struvite Prevention
System
FEATURES:
No Caustics
No Ammonias
No Solvents
No Acids
Neutral pH
No Sodium Metasylicate
USES:
Cleans Polymer Tanks
Cleans Polymer Lines
Cleanup Slippery Polymer Spills
Ends Belt Blinding from Polymer & Sludge Buildup
Improves Sludge Solids
Improves Belt-Filter Press Throughput
Prevents Crystal Agglomeration (Struvite)
Gradually Removes Existing Agglomeration
Increases Belt Life
Reduces Press Down Time for Repair
PASSES:
Priority Pollutant Scan EPA Method 624
Priority Pollutant Scan EPA Method 625
Acute Toxicity Analysis
Belt Fabric Test
For removal of struvite in vertical supernate lines and on belt filter presses.
Directions for use on Belt Filter Presses:
Follow all safety precautions on label.
Rotate belt press with wash water off.
Using power drum pump and hose and nozzle, continuously wet all deposits while press is rotating.
Approximately ever 1/2 hour, cease chemical addition and rinse down (flush away) deposits with garden hose and nozzle assembly.
Directions for use on Verticle Supernate Lines:
Follow all safety precautions on label.
Cease supernating thru the line you desire to clean.
Use a suitable chemical feed pump and necessary length of flexible tubing to reach the top of the supernate line. In the end of the flexible line, rig a temporary bracket to position the flexible tubing in the center of the supernate line.
Slip over the tube a short length (3-4 feet) of PVC. This will keep the tubing straight. On the end of the flexible line, add a spinning nozzle. Turn on the pump and every pulse of the pump will put out a fine rotary mist of WASH-UP which will be absorbed by the struvite. This will completely dissolve your deposits.
TRAMFLOC 903
Polymer
Dispersant & Belt Wash Anti-Blinding Systems
FEATURES:
No Caustics
No Ammonias
No Solvents
No Acids
Neutral pH
No Sodium Metasylicate
USES:
Improves Sludge Solids
Improves Belt-Filter Press Throughput
Cleans Polymer Tanks
Cleans Polymer Lines
Cleans Slippery Polymer Spills
Ends Belt Blinding from Polymer & Sludge Buildup
PASSES:
Priority Pollutant Scan EPA Method 624
Priority Pollutant Scan EPA Method 625
Acute Toxicity Analysis
Belt Fabric Test
Material Safety Data Sheet